Frequency Characteristics |
|
JDS6600-15M |
JDS6600-30M |
JDS6600-40M |
JDS6600-50M |
JDS6600-60M |
Sine frequency range |
0~15MHz |
0~30MHz |
0~40MHz |
0~50MHz |
0~60MHz |
Square frequency range |
0~15MHz |
0~15MHz |
0~15MHz |
0~15MHz |
0~15MHz |
Triangle frequency range |
0~15MHz |
0~15MHz |
0~15MHz |
0~15MHz |
0~15MHz |
Pulse frequency range |
0~6MHz |
0~6MHz |
0~6MHz |
0~6MHz |
0~6MHz |
CMOS/TTL digital frequency range |
0~6MHz |
0~6MHz |
0~6MHz |
0~6MHz |
0~6MHz |
Arbitrary wave frequency range |
0~6MHz |
0~6MHz |
0~6MHz |
0~6MHz |
0~6MHz |
Square rise time |
≤30nS |
≤25nS |
≤20nS |
≤20nS |
≤20nS |
Mininum Frequency resolution |
0.01µHz(0.00000001Hz) |
Frequency accuracy |
±20ppm |
Frequency stability |
±1ppm/3h |
Waveform Characteristics |
Waveform |
Sine, Square, Triangle, Pulse (duty-cycle correction),Partia Sine, CMOS, DC level, Half-wave, Full-Wave, Pos-Ladder, Neg-Ladder, Noise, Exponential Rise, Exponential Fall, Tone, Sinc Pulse, Lorentz Pulse, and 60 kinds user defined waveform. |
Waveform length |
2048 points |
Waveform sampling rate |
JDS6600-15M |
JDS6600-30M |
JDS6600-40M |
JDS6600-50M |
JDS6600-60M |
200MSa/s |
200MSa/s |
200MSa/s |
266MSa/s |
266MSa/s |
Waveform vertical resolution |
12 bits |
Sine |
Harmonic suppression |
≥45dBc(<1MHz); ≥40dBc(1MHz~20MHz) |
|
Total harmonic distortion |
<0.8%(20Hz~20kHz,0dBm) |
Square and Pulse |
Overshoot (Square) |
≤5% |
Duty-cycle range(Pulse) |
0.1%~99.9% |
Ramp wave |
Linearity |
≥98%(0.01Hz~10kHz) |
Output Characteristics |
Amplitude range |
JDS6600-15M |
JDS6600-30M |
JDS6600-40M |
JDS6600-50M |
JDS6600-60M |
≤10MHz: 2mVpp ~ 20Vpp ≤15MHZ: 2mVpp ~ 10Vpp |
≤10MHz: 2mVpp ~ 20Vpp ≤30MHZ: 2mVpp ~ 10Vpp |
≤10MHz: 2mVpp ~ 20Vpp ≤30MHZ: 2mVpp ~ 10Vpp ≤60MHZ: 2mVpp ~ 5Vpp |
Amplitude resolution |
1mV |
Amplitude stability |
±0.5%/5 h |
Amplitude flatness |
±5%(<10MHz); ±10%(>10MHz) |
Waveform Output |
Output impedance |
50Ω±10%(typical) |
Protection |
All the signal output termianl can be shorted within 60s |
DC Offset |
Offset adjusting range |
Output Amplitude >2V |
0.2V<Output Amplitude≤2V |
0<Output Amplitude≤0.2V |
-9.99V~9.99V |
-2.5V~2.5V |
-0.25V~0.25V |
Offset resolution |
0.01 V |
Phase characteristics |
Phase adjusting range |
0~359.9° |
Phase resolution |
0.1° |
TTL/COMS Output |
Low level |
<0.3V |
High level |
1V~10V |
Level rise/fall time |
≤20ns |
External Measurement Function |
Frequency meter function |
Frequency measurement range |
1Hz~100MHz |
|
|
Measurement accuracy |
Gate time continuously adjusted between0.01s~10s |
|
Counter function |
Counting region |
0-4294967295 |
|
|
Coupled mode |
2kinds Coupling modes, DC and AC |
|
|
Control mode |
Manual operation |
|
Input signal voltage range |
2Vpp~20Vpp |
Pulse width measurement |
0.01us (resolution), 20s (MAX measuring time) |
Period measurement |
0.01us (resolution), 20s (MAX measuring time) |
Sweep Function |
Sweep channel |
CH1 or CH2 |
Sweep type |
linear sweep、log sweep |
Sweep time |
0.1s~999.9s |
Setting range |
User settings |
Sweep direction |
Forward, Backward and Roundtrip |
Burst function |
Number of pulses |
1-1048575 |
Burst mode |
Manual Trig、CH2 Trig、Ext.Tring(AC) 、Ext.Tring(DC) |
General technical parameters |
Display |
Display type |
2.4 inch TFT color LCD |
|
Storage and loading |
Quantity |
100 groups |
|
Location |
00 to 99(Power on will load the position 00) |
|
Arbitrary wave |
quantity |
1 to 60, totally 60 groups(default set 15 groups) |
|
Interface |
Interface mode |
USB to serial interface |
|
Extension interface - |
There is serial interface of TTL level mode to be convenient for user development. |
|
Communication speed |
115200bps |
|
communication protocol |
Command-line mode, Open protocol |
|
Power supply |
Voltage range |
DC5V±0.5V |
|
Manufacturing process |
Surface-mount technology, FPGA design, high reliability, long service life |
|
Buzzer |
User can set ON or OFF by procedure |
|
Operating characteristics |
Full button operation, knob continuous adjustment |
|
Environmental conditions |
Temperature:0~40 oCHumidity:<80% |