Product details
Wireless Backup Camera System with 4.3" HD Monitor
Add a wireless rear-camera system with a4.3-inch monitor, a stated 110° lens and 2.4G wireless link. The source lists a PC1058 sensor and an up-to-33-foot signal reference, with actual power and installation requirements to confirm.
- 4.3-inch monitor; HD wording
- PC1058 reference
- 110° stated
Match the wireless image link and power connections
Wireless image transmission does not remove the need to power the camera and monitor. This system describes a vehicle-outlet supply for the monitor and reverse-light power for the camera, giving you two electrical routes to check before fitting. Its4.3-inch display and adjustable parking-line direction provide viewing setup details. Confirm the selected model’s actual signal conditions and image behavior rather than assuming a wireless link is interference-free in every vehicle.
A separate monitor direction
The 4.3-inch monitor supplies a defined display size for the camera image. Compare its actual mount and placement so the screen suits the vehicle without obscuring required views or controls.
A wireless image route
The 2.4G link provides the described camera-to-monitor transmission direction. The up-to-33-foot reference helps define the stated range, with actual obstacles and vehicle layout affecting the setup.
Adjustable guide-line settings
The described parking-line adjustment/on-off controls offer a display-setting direction. Configure while parked and verify alignment against the actual vehicle rather than treating the lines as precise obstacle measurements.
Specifications
- Monitor
- 4.3-inch monitor; HD wording
- Camera sensor
- PC1058 reference
- Viewing angle
- 110° stated
- Wireless reference
- 2.4G; up to 33feet
- Low-light reference
- 0.1-lumen wording; measurement unit/basis unconfirmed
- Protection reference
- IP68 stated; actual model documentation governs
- Power directions
- Monitor vehicle-outlet adapter; camera reverse-light connection
- Guide lines
- Adjustable/on-off described
Choose your setup
Confirm input voltages, wiring, mount, signal support and actual model instructions. Use professional fitting if needed and keep plates, lights, sensors and sightlines clear. Check the image/link before use and continue normal reversing observations. Do not assume zero interference, unlimited low-light visibility or all-weather operation.
Questions, answered
Is the camera completely wire-free?
No. Reverse-light power is described even though the image link is wireless.
What monitor size is listed?
4.3 inches is listed.
More from this collection
-
-
-
$29.00 - $32.00
-
