Product details
Smart Zigbee Water Leak Detector
Place a wireless water sensor at a suitable leak-prone point and link it to a compatible Zigbee 3.0 gateway. This ABS sensor uses a CR2032 battery and lists Tuya Smart or Smart Life app alerts and scene linkage.
- Zigbee 3.0; compatible gateway required
- Tuya Smart; Smart Life
- Water level of 0.01in stated; actual test conditions unspecified
An alert point near the water connection
A supply hose or sink cabinet is a useful place to plan a water-sensing point, provided the sensor sits where water would reach its contacts. A compatible gateway brings its status into the app, while scene linkage can connect a detected event to supported actions. Test the location and notification route before relying on it to draw attention to a leak.
Put sensing near the possible leak
The wireless sensor can be placed beneath a sink or near a washing machine without a sensor cable. Position it where water would actually reach the detection contacts, then test the setup according to the manual.
Bring the event into the app
Through a compatible Zigbee 3.0 gateway, the source lists Tuya Smart or Smart Life monitoring and notifications. That gives a remote alert route when the sensor, gateway, internet and phone services are working.
Link supported scene actions
App scene linkage can connect a detection event to compatible alarms or other devices. Configure and test the actual actions; this sensor does not independently establish an automatic shutoff valve or guaranteed damage prevention.
Specifications
- Protocol
- Zigbee 3.0; compatible gateway required
- Apps
- Tuya Smart; Smart Life
- Detection threshold
- Water level of 0.01in stated; actual test conditions unspecified
- Battery
- CR2032
- Battery feature
- Low-battery reminder listed
- Material
- ABS
- Operating temperature
- −10°C to 55°C / 14°F to 131°F
- Operating humidity
- Up to 95% stated; enclosure immersion rating not provided
- Functions
- Water detection, remote status and scene linkage
- Phone connection
- 3G/4G/Wi-Fi mentioned for remote app access, not the sensor radio
Choose your setup
Confirm a compatible gateway and whether it is supplied. Place and test the contacts where a leak would reach them; do not submerge the unit without an approved rating. Keep battery and gateway status checked. Alerts depend on the complete connection chain and do not guarantee damage prevention; valve shutoff requires a separate compatible system.
Questions, answered
Does the sensor connect directly to Wi-Fi?
The listed sensor protocol is Zigbee 3.0 and a compatible gateway is required. Wi-Fi or mobile data refers to the remote app connection.
What battery does it use?
The source specifies a CR2032 battery and a low-battery reminder.
